台灣癌症登記長表實作指引 (Taiwan Cancer Registry Long Form Implementation Guide)
0.1.1 - ci-build

台灣癌症登記長表實作指引 (Taiwan Cancer Registry Long Form Implementation Guide) - Local Development build (v0.1.1) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: LFOthTreatmentProfile - Detailed Descriptions

Active as of 2024-08-01

Definitions for the lf-OthTreatment-profile resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Procedure
2. Procedure.status
BindingThe codes SHALL be taken from EventStatus
(required to http://hl7.org/fhir/ValueSet/event-status)
Must Supporttrue
4. Procedure.category
Definition

其他治療

Short其他治療
Control1..?
BindingThe codes SHALL be taken from 癌症治療值集
(required to https://hapi.fhir.tw/fhir/ValueSet/lf-ProcedureCode-valueset)
Must Supporttrue
Pattern Value{
  "coding" : [{
    "system" : "https://hapi.fhir.tw/fhir/CodeSystem/lf-ProcedureCode-codesystem",
    "code" : "OtherTreatment",
    "display" : "其他治療"
  }]
}
6. Procedure.code
Definition

其他治療相關情形

Short其他治療相關情形
Control1..?
BindingThe codes SHALL be taken from 其他治療值集
(required to https://hapi.fhir.tw/fhir/ValueSet/lf-OthTreatment-valueset)
Must Supporttrue
8. Procedure.code.coding
Definition

由專門術語系統(terminology system)所定義之代碼的參照

Short由專門術語系統(terminology system)所定義之代碼的參照
Control1..?
Must Supporttrue
10. Procedure.code.coding.system
Definition

專門術語系統(terminology system)的識別

Short專門術語系統(terminology system)的識別
Control1..?
Must Supporttrue
12. Procedure.code.coding.code
Definition

系統定義的語法之符號

Short系統定義的語法之符號
Control1..?
Must Supporttrue
14. Procedure.code.coding.display
Definition

代碼系統定義的表示法

Short代碼系統定義的表示法
Must Supporttrue
16. Procedure.subject
Definition

處置服務的對象

Short處置服務的對象
TypeReference(Patient Profile)
Must Supporttrue
18. Procedure.encounter
Definition

此癌症個案的第一次就醫(Encounter)紀錄

Short此癌症個案的第一次就醫(Encounter)紀錄
TypeReference(Encounter Profile)
Must Supporttrue
20. Procedure.performed[x]
Definition

此處置執行時間

Short此處置執行時間
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
SlicingThis element introduces a set of slices on Procedure.performed[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 22. Procedure.performed[x]:performedPeriod
    Slice NameperformedPeriod
    Definition

    此癌症個案處於特定類別的時間

    Short此癌症個案處於特定類別的時間
    Control0..1
    TypePeriod
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    24. Procedure.performed[x]:performedPeriod.start
    Definition

    其他治療開始日期

    Short其他治療開始日期
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. Procedure
    Definition

    An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

    ShortAn action that is being or was performed on a patient
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Procedure.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Procedure.status
    Definition

    A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

    Shortpreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
    Comments

    The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from EventStatushttp://hl7.org/fhir/ValueSet/event-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/event-status)
    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Procedure.category
    Definition

    其他治療


    A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

    Short其他治療Classification of the procedure
    Control10..1
    BindingThe codes SHALL be taken from For example codes, see 癌症治療值集http://hl7.org/fhir/ValueSet/procedure-category
    (required to https://hapi.fhir.tw/fhir/ValueSet/lf-ProcedureCode-valueset)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "https://hapi.fhir.tw/fhir/CodeSystem/lf-ProcedureCode-codesystem",
        "code" : "OtherTreatment",
        "display" : "其他治療"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Procedure.code
    Definition

    其他治療相關情形


    The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

    Short其他治療相關情形Identification of the procedure
    Control10..1
    BindingThe codes SHALL be taken from For example codes, see 其他治療值集http://hl7.org/fhir/ValueSet/procedure-code
    (required to https://hapi.fhir.tw/fhir/ValueSet/lf-OthTreatment-valueset)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    0..1 to account for primarily narrative only resources.

    Alternate Namestype
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Procedure.code.coding
    Definition

    由專門術語系統(terminology system)所定義之代碼的參照


    A reference to a code defined by a terminology system.

    Short由專門術語系統(terminology system)所定義之代碼的參照Code defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..*
    TypeCoding
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Procedure.code.coding.system
    Definition

    專門術語系統(terminology system)的識別


    The identification of the code system that defines the meaning of the symbol in the code.

    Short專門術語系統(terminology system)的識別Identity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Procedure.code.coding.code
    Definition

    系統定義的語法之符號


    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    Short系統定義的語法之符號Symbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Procedure.code.coding.display
    Definition

    代碼系統定義的表示法


    A representation of the meaning of the code in the system, following the rules of the system.

    Short代碼系統定義的表示法Representation defined by the system
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Procedure.subject
    Definition

    處置服務的對象


    The person, animal or group on which the procedure was performed.

    Short處置服務的對象Who the procedure was performed on
    Control1..1
    TypeReference(Patient Profile, Patient, Group)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Alternate Namespatient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Procedure.encounter
    Definition

    此癌症個案的第一次就醫(Encounter)紀錄


    The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

    Short此癌症個案的第一次就醫(Encounter)紀錄Encounter created as part of
    Comments

    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

    Control0..1
    TypeReference(Encounter Profile, Encounter)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Procedure.performed[x]
    Definition

    此處置執行時間


    Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

    Short此處置執行時間When the procedure was performed
    Comments

    Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

    Control0..1
    TypeChoice of: dateTime, Period, string, Age, Range
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Procedure.performed[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 26. Procedure.performed[x]:performedPeriod
      Slice NameperformedPeriod
      Definition

      此癌症個案處於特定類別的時間


      Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

      Short此癌症個案處於特定類別的時間When the procedure was performed
      Comments

      Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

      Control0..1
      TypePeriod, dateTime, string, Range, Age
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Procedure.performed[x]:performedPeriod.start
      Definition

      其他治療開始日期


      The start of the period. The boundary is inclusive.

      Short其他治療開始日期Starting time with inclusive boundary
      Comments

      If the low element is missing, the meaning is that the low boundary is not known.

      Control0..1
      This element is affected by the following invariants: per-1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Procedure
      Definition

      An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

      ShortAn action that is being or was performed on a patient
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Procedure.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Procedure.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Procedure.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Procedure.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Procedure.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Procedure.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Procedure.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Procedure.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Procedure.identifier
      Definition

      Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

      ShortExternal Identifiers for this procedure
      Comments

      This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Procedure.instantiatesCanonical
      Definition

      The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

      ShortInstantiates FHIR protocol or definition
      Control0..*
      Typecanonical(PlanDefinition, ActivityDefinition, Measure, OperationDefinition, Questionnaire)
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Procedure.instantiatesUri
      Definition

      The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

      ShortInstantiates external protocol or definition
      Comments

      This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

      Control0..*
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Procedure.basedOn
      Definition

      A reference to a resource that contains details of the request for this procedure.

      ShortA request for this procedure
      Control0..*
      TypeReference(CarePlan, ServiceRequest)
      Is Modifierfalse
      Summarytrue
      Alternate Namesfulfills
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Procedure.partOf
      Definition

      A larger event of which this particular procedure is a component or step.

      ShortPart of referenced event
      Comments

      The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

      Control0..*
      TypeReference(Procedure, Observation, MedicationAdministration)
      Is Modifierfalse
      Summarytrue
      Alternate Namescontainer
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Procedure.status
      Definition

      A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

      Shortpreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
      Comments

      The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from EventStatus
      (required to http://hl7.org/fhir/ValueSet/event-status)
      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Procedure.statusReason
      Definition

      Captures the reason for the current state of the procedure.

      ShortReason for current status
      Comments

      This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

      Control0..1
      BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT)
      (example to http://hl7.org/fhir/ValueSet/procedure-not-performed-reason)

      A code that identifies the reason a procedure was not performed.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Alternate NamesSuspended Reason, Cancelled Reason
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Procedure.category
      Definition

      其他治療

      Short其他治療
      Control1..1
      BindingThe codes SHALL be taken from 癌症治療值集
      (required to https://hapi.fhir.tw/fhir/ValueSet/lf-ProcedureCode-valueset)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "https://hapi.fhir.tw/fhir/CodeSystem/lf-ProcedureCode-codesystem",
          "code" : "OtherTreatment",
          "display" : "其他治療"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Procedure.code
      Definition

      其他治療相關情形

      Short其他治療相關情形
      Control1..1
      BindingThe codes SHALL be taken from 其他治療值集
      (required to https://hapi.fhir.tw/fhir/ValueSet/lf-OthTreatment-valueset)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      0..1 to account for primarily narrative only resources.

      Alternate Namestype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Procedure.code.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      38. Procedure.code.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Procedure.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 40. Procedure.code.coding
        Definition

        由專門術語系統(terminology system)所定義之代碼的參照

        Short由專門術語系統(terminology system)所定義之代碼的參照
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control1..*
        TypeCoding
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Procedure.code.coding.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        44. Procedure.code.coding.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Procedure.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 46. Procedure.code.coding.system
          Definition

          專門術語系統(terminology system)的識別

          Short專門術語系統(terminology system)的識別
          Comments

          The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Need to be unambiguous about the source of the definition of the symbol.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Procedure.code.coding.version
          Definition

          The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

          ShortVersion of the system - if relevant
          Comments

          Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

          NoteThis is a business version Id, not a resource version Id (see discussion)
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Procedure.code.coding.code
          Definition

          系統定義的語法之符號

          Short系統定義的語法之符號
          Control1..1
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Need to refer to a particular code in the system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Procedure.code.coding.display
          Definition

          代碼系統定義的表示法

          Short代碼系統定義的表示法
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. Procedure.code.coding.userSelected
          Definition

          Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

          ShortIf this coding was chosen directly by the user
          Comments

          Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

          Control0..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Procedure.code.text
          Definition

          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

          ShortPlain text representation of the concept
          Comments

          Very often the text is the same as a displayName of one of the codings.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Procedure.subject
          Definition

          處置服務的對象

          Short處置服務的對象
          Control1..1
          TypeReference(Patient Profile)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Alternate Namespatient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Procedure.encounter
          Definition

          此癌症個案的第一次就醫(Encounter)紀錄

          Short此癌症個案的第一次就醫(Encounter)紀錄
          Comments

          This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

          Control0..1
          TypeReference(Encounter Profile)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Procedure.performed[x]
          Definition

          此處置執行時間

          Short此處置執行時間
          Comments

          Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

          Control0..1
          TypeChoice of: dateTime, Period, string, Age, Range
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Procedure.performed[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • type @ $this
          • 64. Procedure.performed[x]:performedPeriod
            Slice NameperformedPeriod
            Definition

            此癌症個案處於特定類別的時間

            Short此癌症個案處於特定類別的時間
            Comments

            Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

            Control0..1
            TypePeriod
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Procedure.performed[x]:performedPeriod.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            68. Procedure.performed[x]:performedPeriod.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Procedure.performed[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 70. Procedure.performed[x]:performedPeriod.start
              Definition

              其他治療開始日期

              Short其他治療開始日期
              Comments

              If the low element is missing, the meaning is that the low boundary is not known.

              Control0..1
              This element is affected by the following invariants: per-1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Procedure.performed[x]:performedPeriod.end
              Definition

              The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

              ShortEnd time with inclusive boundary, if not ongoing
              Comments

              The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

              Control0..1
              This element is affected by the following invariants: per-1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Procedure.recorder
              Definition

              Individual who recorded the record and takes responsibility for its content.

              ShortWho recorded the procedure
              Control0..1
              TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Procedure.asserter
              Definition

              Individual who is making the procedure statement.

              ShortPerson who asserts this procedure
              Control0..1
              TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Procedure.performer
              Definition

              Limited to "real" people rather than equipment.

              ShortThe people who performed the procedure
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Procedure.performer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              82. Procedure.performer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              84. Procedure.performer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              86. Procedure.performer.function
              Definition

              Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

              ShortType of performance
              Control0..1
              BindingFor example codes, see ProcedurePerformerRoleCodes
              (example to http://hl7.org/fhir/ValueSet/performer-role)

              A code that identifies the role of a performer of the procedure.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows disambiguation of the types of involvement of different performers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. Procedure.performer.actor
              Definition

              The practitioner who was involved in the procedure.

              ShortThe reference to the practitioner
              Control1..1
              TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
              Is Modifierfalse
              Summarytrue
              Requirements

              A reference to Device supports use cases, such as pacemakers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. Procedure.performer.onBehalfOf
              Definition

              The organization the device or practitioner was acting on behalf of.

              ShortOrganization the device or practitioner was acting for
              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summaryfalse
              Requirements

              Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Procedure.location
              Definition

              The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

              ShortWhere the procedure happened
              Control0..1
              TypeReference(Location)
              Is Modifierfalse
              Summarytrue
              Requirements

              Ties a procedure to where the records are likely kept.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Procedure.reasonCode
              Definition

              The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

              ShortCoded reason procedure performed
              Comments

              Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

              Control0..*
              BindingFor example codes, see ProcedureReasonCodes
              (example to http://hl7.org/fhir/ValueSet/procedure-reason)

              A code that identifies the reason a procedure is required.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Procedure.reasonReference
              Definition

              The justification of why the procedure was performed.

              ShortThe justification that the procedure was performed
              Comments

              It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

              Control0..*
              TypeReference(Condition, Observation, Procedure, DiagnosticReport, DocumentReference)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. Procedure.bodySite
              Definition

              Detailed and structured anatomical location information. Multiple locations are allowed - e.g. multiple punch biopsies of a lesion.

              ShortTarget body sites
              Comments

              If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

              Control0..*
              BindingFor example codes, see SNOMEDCTBodyStructures
              (example to http://hl7.org/fhir/ValueSet/body-site)

              Codes describing anatomical locations. May include laterality.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Procedure.outcome
              Definition

              The outcome of the procedure - did it resolve the reasons for the procedure being performed?

              ShortThe result of procedure
              Comments

              If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

              Control0..1
              BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)
              (example to http://hl7.org/fhir/ValueSet/procedure-outcome)

              An outcome of a procedure - whether it was resolved or otherwise.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Procedure.report
              Definition

              This could be a histology result, pathology report, surgical report, etc.

              ShortAny report resulting from the procedure
              Comments

              There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

              Control0..*
              TypeReference(DiagnosticReport, DocumentReference, Composition)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Procedure.complication
              Definition

              Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

              ShortComplication following the procedure
              Comments

              If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

              Control0..*
              BindingFor example codes, see Condition/Problem/DiagnosisCodes
              (example to http://hl7.org/fhir/ValueSet/condition-code)

              Codes describing complications that resulted from a procedure.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Procedure.complicationDetail
              Definition

              Any complications that occurred during the procedure, or in the immediate post-performance period.

              ShortA condition that is a result of the procedure
              Control0..*
              TypeReference(Condition)
              Is Modifierfalse
              Summaryfalse
              Requirements

              This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              108. Procedure.followUp
              Definition

              If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

              ShortInstructions for follow up
              Control0..*
              BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT)
              (example to http://hl7.org/fhir/ValueSet/procedure-followup)

              Specific follow up required for a procedure e.g. removal of sutures.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              110. Procedure.note
              Definition

              Any other notes and comments about the procedure.

              ShortAdditional information about the procedure
              Control0..*
              TypeAnnotation
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              112. Procedure.focalDevice
              Definition

              A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

              ShortManipulated, implanted, or removed device
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              114. Procedure.focalDevice.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              116. Procedure.focalDevice.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              118. Procedure.focalDevice.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              120. Procedure.focalDevice.action
              Definition

              The kind of change that happened to the device during the procedure.

              ShortKind of change to device
              Control0..1
              BindingThe codes SHOULD be taken from ProcedureDeviceActionCodes
              (preferred to http://hl7.org/fhir/ValueSet/device-action)

              A kind of change that happened to the device during the procedure.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              122. Procedure.focalDevice.manipulated
              Definition

              The device that was manipulated (changed) during the procedure.

              ShortDevice that was changed
              Control1..1
              TypeReference(Device)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              124. Procedure.usedReference
              Definition

              Identifies medications, devices and any other substance used as part of the procedure.

              ShortItems used during procedure
              Comments

              For devices actually implanted or removed, use Procedure.device.

              Control0..*
              TypeReference(Device, Medication, Substance)
              Is Modifierfalse
              Summaryfalse
              Requirements

              Used for tracking contamination, etc.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              126. Procedure.usedCode
              Definition

              Identifies coded items that were used as part of the procedure.

              ShortCoded items used during the procedure
              Comments

              For devices actually implanted or removed, use Procedure.device.

              Control0..*
              BindingFor example codes, see FHIRDeviceTypes
              (example to http://hl7.org/fhir/ValueSet/device-kind)

              Codes describing items used during a procedure.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))